Weldbend Corporation
 
you are here: Home > Weldbend Catalog > Fittings > 45º Elbows
45º Elbows
STANDARD WEIGHT
Inches / Pounds

Standard 45º Elbow
For Metric Units  >Click Here
Nominal Pipe Size Outside Diameter Inside Diameter
Wall Thickness
(T)

Center to End
(B)		 Pipe Schedule Weight in Pounds
 
1/2 .840 .622 .109 0.62 40 0.09
3/4 1.05 .824 .113 0.75 40 0.10
1 1.32 1.05 .133 0.88 40 0.22
1 1/4 1.66 1.38 .140 1.00 40 0.33
1 1/2 1.90 1.61 .145 1.12 40 0.43
2 2.38 2.07 .154 1.38 40 0.85
2 1/2 2.88 2.47 .203 1.75 40 1.7
3 3.50 3.07 .216 2.00 40 2.5
3 1/2 4.00 3.55 .226 2.25 40 3.4
4 4.50 4.03 .237 2.50 40 4.5
5 5.56 5.05 .258 3.12 40 7.5
6 6.62 6.06 .280 3.75 40 11.7
8 8.62 7.98 .322 5.00 40 23.3
10 10.75 10.02 .365 6.25 40 40.9
12 12.75 12.00 .375 7.50 * 61.4
14 14.00 13.25 .375 8.75 30 78.1
16 16.00 15.25 .375 10.00 30 101
18 18.00 17.25 .375 11.25 * 128
20 20.00 19.25 .375 12.50 20 159
24 24.00 23.25 .375 15.00 20 231
30 30.00 29.25 .375 18.50 * 358
36 36.00 35.25 .375 22.25 * 518
42 42.00 41.25 .375 26.00 * 707
48 48.00 47.25 .375 29.88 * 1,000

Extra Strong >

* This Size and thickness does not correspond to any pipe schedule number.

  1. Dimensions conform to ASME B16.9 & material conforms to ASTM A-234 Grade B

  2. For bevel detail see page 50.

  3. For dimensional tolerances see page 51.
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.