Weldbend Corporation
 
you are here: Home > Weldbend Catalog > Fittings > Long Radius 180º Return Bends
Long Radius 180º Return Bends
EXTRA STRONG
Inches / Pounds

Extra Strong Long Radius 180º Return Bend

For Metric Conversion >Click Here
Nominal Pipe Size Outside Diameter Inside Diameter
Wall Thickness
(T)
Center To Center
(O)
Back To Face
(K)		 Pipe Schedule Weight In Pounds
 
1/2 0.84 .546 .147 3.00 1.31 80 .45
3/4 1.05 .742 .154 2.25 1.69 80 .52
1 1.32 .957 .179 3.00 2.12 80 .97
1 1/4 1.66 1.28 .191 3.75 2.75 80 1.6
1 1/2 1.90 1.50 .200 4.50 3.25 80 2.2
2 2.38 1.94 .218 6.00 4.12 80 4.1
2 1/2 2.88 2.32 .276 7.50 5.12 80 7.7
3 3.50 2.90 .300 9.00 6.25 80 12.4
3 1/2 4.00 3.36 .318 10.50 7.25 80 17.1
4 4.50 3.83 .337 12.00 8.25 80 24.1
5 5.56 4.81 .375 15.00 10.31 80 41.7
6 5.76 5.76 .432 18.00 12.31 80 68.2
8 8.63 7.63 .500 24.00 16.31 80 140
10 10.75 9.75 .500 30.00 20.38 60 217
12 12.75 11.75 .500 36.00 24.38 * 311
14 14.00 13.00 .500 42.00 28.00 * 400
16 16.00 15.00 .500 48.00 32.00 40 540
18 18.00 17.00 .500 54.00 36.00 * 686
20 20.00 19.00 .500 60.00 40.00 30 840
24 24.00 23.00 .500 72.00 48.00 * 1210
 < Standard
 
* This Size and thickness does not correspond to any pipe schedule number.
  1. Dimensions conform to ASME B16.9 & material conforms to ASTM A-234 Grade B
  2. For bevel detail see page 50.
  3. For dimensional tolerances see page 51.
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.