Weldbend Corporation
 
you are here: Home > Weldbend Catalog > Fittings > Reducing Tees (page 3 of 3)
Reducing Tees
 EXTRA STRONG
 Inches / Pounds

Extra Heavy Reducing Tee
For Metric Units >Click Here

Nominal
Pipe Size
Run/Branch		 Dimensions of Run Dimensions of Branch Pipe Schedule Weight in Pounds
Outside
Diameter		 Wall Thickness
(T)		 Inside
Diameter		 Center to End
(C)		 Outside Diameter Wall Thickness
(T)		 Inside Diameter Center to End
(M)
 
30 x 24 30.00 .500 29.00 22.00 24.00 .500 23.00 21.50 * 994
30 x 20 30.00 .500 29.00 22.00 20.00 .500 19.00 20.00 * 945
30 x 18 30.00 .500 29.00 22.00 18.00 .500 17.00 19.50 * 920
36 x 30 36.00 .500 35.00 26.50 30.00 .500 29.00 25.00 * 1,510
36 x 24 36.00 .500 35.00 26.50 24.00 .500 23.00 24.00 * 1,415
36 x 20 36.00 .500 35.00 26.50 20.00 .500 19.00 23.00 * 1,345
36 x 18 36.00 .500 35.00 26.50 18.00 .500 17.00 22.50 * 1,321
42 x 36 42.00 .500 41.00 30.00 36.00 .500 35.00 28.00 * 1,709
42 x 30 42.00 .500 41.00 30.00 30.00 .500 29.00 28.00 * 1,629
42 x 24 42.00 .500 41.00 30.00 24.00 .500 23.00 26.00 * 1,550
48 x 42 48.00 .500 47.00 35.00 42.00 .500 41.00 32.00 * 2,207
48 x 36 48.00 .500 47.00 35.00 36.00 .500 35.00 31.00 * 2,127
48 x 30 48.00 .500 47.00 35.00 30.00 .500 29.00 30.00 * 2,048
NPS O.D. WALL I.D. CENTER TO END O.D. WALL I.D. CENTER TO END PIPE SCHEDULE POUNDS
         
 < Previous
 
* This Size and thickness does not correspond to any pipe schedule number.
  1. Dimensions conform to ASME B16.9 & material conforms to ASTM A-234 Grade B
  2. For bevel detail see page 50.
  3. For dimensional tolerances see page 51.
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.