Weldbend Corporation
 
you are here: Home > Weldbend Catalog > Fittings > Short Radius 180º Return Bends
Short Radius 180º Return Bends
STANDARD WEIGHT
Inches / Pounds

Standard Short Radius 180º Return Bend
For Metric Units >Click Here
 Nominal Pipe Size Outside Diameter Inside Diameter
Wall Thickness
(T)
Center to Center
(O)
Back to Face
(K)		 Pipe Schedule Weight in Pounds
 
1 1.32 1.05 .133 2.00 1.62 40 .50
1 1/4 1.66 1.38 .140 2.50 2.06 40 .80
1 1/2 1.90 1.61 .145 3.00 2.44 40 1.1
2 2.38 2.07 .154 4.00 3.19 40 1.9
2 1/2 2.88 2.47 .203 5.00 3.94 40 4
3 3.50 3.07 .216 6.00 4.75 40 6
3 1/2 4.00 3.55 .226 7.00 5.50 40 8.7
4 4.50 4.03 .237 8.00 6.25 40 12.2
5 5.56 5.05 .258 10.00 7.75 40 19.2
6 6.62 6.07 .280 12.00 9.31 40 32.9
8 8.62 7.98 .322 16.00 12.31 40 64.9
10 10.75 10.02 .365 20.00 15.38 40 112
12 12.75 12.00 .375 24.00 18.38 * 157
14 14.00 13.25 .375 28.00 21.00 30 208
16 16.00 15.25 .375 32.00 24.00 30 257
18 18.00 17.25 .375 36.00 27.00 * 325
20 20.00 19.25 .375 40.00 30.00 20 416
24 24.00 23.25 .375 48.00 36.00 20 592

Extra Strong >
* This Size and thickness does not correspond to any pipe schedule number.
  1. Dimensions conform to ASME B16.9 & material conforms to ASTM A-234 Grade B
  2. For bevel detail see page 50.
  3. For dimensional tolerances see page 51.
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.