Weldbend Corporation
 
you are here: Home > Weldbend Catalog > Fittings > Short Radius 90º Elbows
Short Radius 90º Elbows
STANDARD WEIGHT
Inches / Pounds

Standard Short Radius 90º Elbow
For Metric Units >Click Here
 Nominal Pipe Size Outside Diameter Inside Diameter Wall Thickness
(T)		 Center To End
(A)		 Pipe Schedule Weight In Pounds
 
1 1.32 1.05 .133 1.00 40 0.25
1 1/4 1.66 1.38 .140 1.25 40 0.39
1 1/2 1.90 1.61 .145 1.50 40 0.53
2 2.38 2.07 .154 2.00 40 0.97
2 1/2 2.88 2.47 .203 2.50 40 2
3 3.50 3.07 .216 3.00 40 3
3 1/2 4.00 3.55 .226 3.50 40 4.3
4 4.50 4.03 .237 4.00 40 6.1
5 5.56 5.05 .258 5.00 40 9.7
6 6.63 6.07 .280 6.00 40 16.7
8 8.63 7.98 .322 8.00 40 32.4
10 10.75 10.02 .365 10.00 40 56.3
12 12.75 12.00 .375 12.00 * 79.4
14 14.00 13.25 .375 14.00 30 104
16 16.00 15.25 .375 16.00 30 129
18 18.00 17.25 .375 18.00 * 163
20 20.00 19.25 .375 20.00 20 210
24 24.00 23.25 .375 24.00 20 297
30 30.00 29.25 .375 30.00 * 480
36 36.00 35.25 .375 36.00 * 692
42 42.00 41.25 .375 42.00 * 967
48 48.00 47.25 .375 48.00 * 1,340

Extra Strong >  

* This Size and thickness does not correspond to any pipe schedule number.

  1. Dimensions conform to ASME B16.9 & material conforms to ASTM A-234 Grade B

  2. For bevel detail see page 50.

  3. For dimensional tolerances see page 51.
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.