Weldbend Corporation
 
you are here: Home > Weldbend Catalog > Fittings > Straight Tees
Straight Tees
EXTRA STRONG
Inches / Pounds

Extra Strong Straight Tee
For Metric Units >Click Here
Nominal Pipe Size Outside
Diameter		 Inside Diameter
Wall Thickness
(T)
Center To End
(C)
Center To End
(M)		 Pipe Schedule Weight In Pounds
 
1/2 .840 .546 .147 1.00 1.00 80 .37
3/4 1.050 .742 .154 1.12 1.12 80 .58
1 1.315 .957 .179 1.50 1.50 80 .87
1 1/4 1.660 1.278 .191 1.88 1.88 80 1.6
1 1/2 1.900 1.500 .200 2.25 2.25 80 2.3
2 2.375 1.939 .218 2.50 2.50 80 3.9
2 1/2 2.875 2.323 .276 3.00 3.00 80 6.5
3 3.500 2.900 .300 3.38 3.38 80 9
3 1/2 4.000 3.364 .318 3.75 3.75 80 12.2
4 4.500 3.826 .337 4.12 4.12 80 16.2
5 5.563 4.813 .375 4.88 4.88 80 26.6
6 6.625 5.761 .432 5.62 5.62 80 41.8
8 8.625 7.625 .500 7.00 7.00 80 76.2
10 10.75 9.750 .500 8.50 8.50 60 115
12 12.75 11.75 .500 10.00 10.00 * 169
14 14.00 13.00 .500 11.00 11.00 * 237
16 16.00 15.00 .500 12.00 12.00 40 284
18 18.00 17.00 .500 13.50 13.50 * 353
20 20.00 19.00 .500 15.00 15.00 30 442
24 24.00 23.00 .500 17.00 17.00 * 625
30 30.00 29.00 .500 22.00 22.00 * 1,065
36 36.00 35.00 .500 26.50 26.50 * 1,610
42 42.00 41.00 .500 30.00 28.00 * 1,788
48 48.00 47.00 .500 35.00 33.00 * 2,300
< Standard
 
* This Size and thickness does not correspond to any pipe schedule number.
  1. Dimensions conform to ASME B16.9 & material conforms to ASTM A-234 Grade B
  2. For bevel detail see page 50.
  3. For dimensional tolerances see page 51.
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.