Weldbend Corporation
 
you are here: Home > Weldbend Catalog > Fittings > Straight Tees / Metric Units
Straight Tees
 STANDARD WEIGHT
 Millimeters / Kilograms

Standard Straight Tee
To Convert Back to Inches >Click Here


Pipe Size
(DN)		 Outside Diameter Inside Diameter
Wall Thickness
(T)
Center To End
(C)
Center To End
(M)		 Pipe Schedule Weight In Kilograms
15 21.3 15.7 2.7 25 25 40 0.2
20 26.7 20.9 2.8 29 29 40 0.2
25 33.4 26.6 3.3 38 38 40 0.3
32 42.2 35.0 3.5 48 48 40 0.6
40 48.3 40.8 3.6 57 57 40 0.9
50 60.3 52.5 3.9 64 64 40 1.5
65 73.0 62.7 5.1 76 76 40 2.6
80 88.9 77.9 5.4 86 86 40 3.3
90 101.6 90.1 5.7 95 95 40 4.3
100 114.3 102.2 6.0 105 105 40 5.7
125 141.3 128.1 6.5 124 124 40 9.4
150 168.3 154.0 7.1 143 143 40 15
200 219.1 202.7 8.1 178 178 40 25.6
250 273.0 254.5 9.2 216 216 40 41.2
300 323.8 304.8 9.5 254 254 * 61.7
350 355.6 336.5 9.5 279 279 30 73.5
400 406.4 387.3 9.5 305 305 30 93.4
450 457 438.15 9.5 343 343 * 123.4
500 508 488.9 9.5 381 381 20 158.8
600 610 590.5 9.5 432 432 20 230.4
750 762 742.6 9.6 559 559 * 378.8
900 914 895.0 9.6 673 673 * 587
1050 1067 1047.4 9.6 762 711 * 678.1
1200 1219 1199.8 9.6 889 838 * 1043.3

Extra Strong Metric > 

* This Size and thickness does not correspond to any pipe schedule number.
  1. Dimensions conform to ASME B16.9 & material conforms to ASTM A-234 Grade B
  2. For bevel detail see page 50.
  3. For dimensional tolerances see page 51.
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.