Weldbend Corporation
 
you are here: Home > Weldbend Catalog > Fittings > Straight Tees / Metric Units
Straight Tees
EXTRA STRONG
Millimeters / Kilograms

Extra Straight Straight Tee
To Convert Back to Inches >Click Here


Pipe Size
(DN)		 Outside Diameter Inside Diameter
Wall Thickness
(T)
Center To End
(C)
Center To End
(M)		 Pipe Schedule Weight In Kilograms
15 21.3 13.8 3.7 25 25 40 0.2
20 26.7 18.8 3.9 29 29 40 0.3
25 33.4 24.3 4.5 38 38 40 0.4
32 42.2 32.4 4.8 48 48 40 0.7
40 48.3 38.1 5.0 57 57 40 1
50 60.3 49.2 5.5 64 64 40 1.8
65 73.0 59.0 7.0 76 76 40 2.9
80 88.9 73.6 7.6 86 86 40 4.1
90 101.6 85.4 8.0 95 95 40 5.5
100 114.3 97.1 8.5 105 105 40 7.3
125 141.3 122.2 9.5 124 124 40 12.1
150 168.3 146.3 10.9 143 143 40 19
200 219.1 193.6 12.7 178 178 40 34.6
250 273.0 247.6 12.7 216 216 40 52.2
300 323.8 298.4 12.7 254 254 * 76.7
350 355.6 330.2 12.7 279 279 30 107.5
400 406.4 381.0 12.7 305 305 30 128.8
450 457 431.8 12.7 343 343 * 160.1
500 508 482.6 12.7 381 381 20 200.4
600 610 584.2 12.7 432 432 20 283.5
750 762 736.6 12.7 559 559 * 483.1
900 914 889.0 12.7 673 673 * 730.3
1050 1067 1041.4 12.7 762 711 * 811
1200 1219 1193.8 12.7 889 838 * 1043.3

< Standard Metric
 
* This Size and thickness does not correspond to any pipe schedule number.
  1. Dimensions conform to ASME B16.9 & material conforms to ASTM A-234 Grade B
  2. For bevel detail see page 50.
  3. For dimensional tolerances see page 51.
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.