Weldbend Corporation
 

you are here: Home > Weldbend Catalog > Technical Data > Dimensions of Welding Ends
 
Dimensions Of Extra Strong Welding Ends
 

EXTRA STRONG
 Nominal Pipe Size Wall Thickness Designation Outside Diameter Inside Diameter Wall Thickness
 
1/2 XS .840 .546 .147
3/4 XS 1.050 .742 .154
1 XS 1.315 .957 .179
1 1/4 XS 1.660 1.278 .191
1 1/2 XS 1.900 1.500 .200
2 XS 2.375 1.939 .218
2 1/2 XS 2.875 2.323 .276
3 XS 3.500 2.900 .300
3 1/2 XS 4.000 3.364 .318
4 XS 4.500 3.826 .337
5 XS 5.563 4.813 .375
6 XS 6.625 5.761 .432
8 XS 8.625 7.625 .500
10 XS 10.75 9.75 .500
12 XS 12.75 11.75 .500
14 XS 14.00 13.00 .500
16 XS 16.00 15.00 .500
18 XS 18.00 17.00 .500
20 XS 20.00 19.00 .500
24 XS 24.00 23.00 .500
30 XS 30.00 29.00 .500
36 XS 36.00 35.00 .500
42 XS 42.00 41.00 .500
48 XS 48.00 47.00 .500
< Standard
 
Weldbend Notes:
  1. Dimensions are in inches.
  2. Designations per ASME B36.10.
    STD = Standard Wall Thickness
    XS = Extra Strong Wall Thickness
  3. For tolerances see page 51.
  4. Conforms to ASME B36.10
www.weldbend.com Copyright © 2002 by Weldbend Corporation. All Rights Reserved.