|
|
|
|
| YOU ARE HERE: Home > Weldbend Catalog >Technical Data > Material Specifications (page 1 of 2) |
| Material Specifications |
| Material | ASTM Specification | Nominal Composition | Minimum | Form | ||
| Number | Grade |
Tensile Strength |
Yield Point |
|||
|
CARBON STEELS |
||||||
| A53 |
A B |
Low Carbon Low Carbon |
48,000 60,000 |
30,000 35,000 |
Tubular | |
| A105 | 0.35% C max., 0.90% Mn max. | 70,000 | 36,000 | Forging | ||
| A106 |
A B |
0.25% C max., 0.27-0.93% Mn 0.25% C max., 0.27-0.93% Mn |
48,000 60,000 |
30,000 35,000 |
Tubular | |
| A134 | - - | Low Carbon | - - | - - | Tubular | |
| A139 |
A B |
Low Carbon, 0.30-1.00% Mn 0.30% C max., 0.30-1.00% Mn |
48,000 60,000 |
30,000 35,000 |
Tubular | |
| A155 |
C45 C50 C55 |
Low Carbon, 0.80% Mn max. Low Carbon, 0.80% Mn max. Low Carbon, 0.80% Mn max. |
45,000 50,000 55,000 |
24,000 27,000 30,000 |
Tubular | |
| A212 |
A B |
0.33% C max., 0.90% Mn max. 0.35% C max., 0.90% Mn max. |
65,000 70,000 |
35,000 38,000 |
Plate | |
| A245 | C | 0.18-0.25% C, 0.30-0.60% Mn | 55,000 | 33,000 | Plate | |
| A285 |
B C |
Low Carbon, 0.80% Mn max. Low Carbon, 0.80% Mn max. |
50,000 55,000 |
27,000 30,000 |
Plate | |
| A333 | C | 0.25% C max., 0.64-1.06% Mn | 55,000 | 30,000 | Tubular | |
| *5L |
A B |
0.22% C max., 0.95% Mn max. 0.27% C max., 1.35% Mn max. |
48,000 60,000 |
30,000 35,000 |
Tubular | |
| *5LX | X42 | 0.30% C max., 1.35% Mn max. | 60,000 | 42,000 | Tubular | |
|
|
||||||
|
ALLOY STEELS |
A182 |
F1 F5a F9 F12 F22 |
0.20-0.30% C max., 0.50% Mo 4-6% Cr, 0.50% Mo 9%Cr, 1% Mo 1% Cr, 0.50% Mo 2.25% Cr, 1% Mo |
70,000 90,000 100,000 70,000 70,000 |
40,000 65,000 70,000 40,000 40,000 |
Forging |
| A204 |
A B |
0.25% C max., 0.50% Mo 0.27% C max., 0.50% Mo |
65,000 70,000 |
37,000 40,000 |
Plate | |
| A333 | 3 | 0.19% C max., 3.5% Ni | 65,000 | 35,000 | Tubular | |
| A335 |
P1 P15 |
0.10-0.20% C, 0.50% Mo 1.15-1.65% Si, 0.50% Mo |
55,000 60,000 |
30,000 30,000 |
Tubular | |
| A333 | 4 | 0.12% C max., 0.75% Cr, 0.50% Cu | 60,000 | 30,000 | Tubular | |
| A350 | LF4 | 0.75% Ni, 0.15% Al | 60,000 | 30,000 | Forging | |
| A335 |
P2 P3 P3b P5 P5b P5c P7 P9 P11 P12 P22 |
0.50% Cr, 0.50% Mo 1.75% Cr, 0.75% Mo 2% Cr, 0.50% Mo 4-6% Cr, 0.50% Mo 4-6% Cr, 1-2% Si, 0.50% Mo 4-6% Cr, 0.50% Mo, Ti or Cb Stabilized 7% Cr, 0.50% Mo 9% Cr, 1% Mo 1.25% Cr, 0.50% Mo, 0.50-1% Si 1% Cr, 0.50% Mo 2.25% Cr, 1% Mo |
55,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 |
30,000 30,000 30,000 30,000 30,000 30,000 30,000 30,000 30,000 30,000 30,000 |
Tubular | |
| A350 | LF3 | 0.20% C max., 3.5% Ni | 70,000 | 40,000 | Forging | |
| TRI-TEN |
0.25% C max., 1.30% Mn max.,
0.30-0.60% Cu, 0.50-1% Ni |
70,000^ | 50,000^ | Plate | ||
| Carbon Manganese | 0.22-0.30% C, 1- 1.35% Mn, 0.15-0.30% Si | 80,000^ | 52,000^ | Plate | ||
|
* 5L and 5LX are API Specifications |
| www.weldbend.com | Copyright © 2002 by Weldbend Corporation. All Rights Reserved. |
